TOHATSU EverRu MX 18E2 Manual De Servicio página 38

Service Information
a 5 - 25 mm (0.2 - 1.0 in)
1-16
4) Fuel and Fuel Line
Check that fuel tank contains sufficient amount of pre-
mixed gasoline, fuel line is connected and does not leak.
Supply only unleaded regular octane gasoline
into fuel tank. Use fuel mixed with oil.
Fuel and oil mixing ratio is 50:1. For break-in
period, 25:1 mixture shall be used.
5) Installation of Outboard Motor (Rigging)
Check that outboard motor is fixed on the hull with clamp
screw securely. Check location of anti-ventilation plate
relative to boat bottom.
a
CAUTION
Test-run to determine the best installation height.
Anti-ventilation plate standard position a :
5 - 25 mm (0.2 - 1.0in) below boat bottom
GB
2st X18E2 2012