Attaching Recirculation Hoses; Installing Carburetor And Intake Silencer - TOHATSU EverRu MX 18E2 Manual De Servicio

Power Unit
$
#
2
Discharge Direction
Down Up
Check Valve
1
1 1
5-74
2. Attach and tighten securing bolts
torque in the order of the numbers shown.
Then, attach throttle arm.
%
!
1342
1342

30) Attaching Recirculation Hoses

1. Attach recirculation hoses.
31) Installing Carburetor and
Intake Silencer
Install new O ring and carburetor 1. Tighten bolts to
1.
specified torque. Then, attach fuel filter.
Bolts - :
1 7
9 N · m (7 lb · ft) [0.9 kgf · m]
· Use new gaskets.
· When reusing reed valve mounting screw
apply screw lock #1342.
Bolts :
6 N · m (4 lb · ft) [0.6 kgf · m]
GB
to to specified
1 7
,
3
2st X18E2 2012