Removing Steering Shaft Arm; Installing Steering Shaft - TOHATSU EverRu MX 18E2 Manual De Servicio

Bracket
1 1
3 3
2 2
7-32

10) Removing Steering Shaft Arm

1.
2.

11) Installing Steering Shaft

1.
2.
1
2
3
4
5
6
3.
4 4
Pull up steering shaft arm 1 to remove.
Do not lose bushing 2 and thrust plate 3.
Check friction piece, bushing and thrust plate. Replace if
necessary.
Attach thrust plate 1 and bushing 2 friction piece 3 to
steering shaft.
Stand swivel bracket ass'y vertically, and insert steering
shaft into swivel bracket ass'y.
Attach bushing 4, new O ring 5, and thrust plate 6 to
swivel bracket.
· Push bushing by using flat head screw driver
until it stops.
· Put O ring until it contacts bushing.
OBM
OBM OBM OBM
GB
2st X18E2 2012