Cleaning And Inspection - TOHATSU EverRu MX 18E2 Manual De Servicio

Fuel System
3
4-20

3) Cleaning and Inspection

1. Check carburetor body for crack, damage and dirt. Replace
or clean as necessary.
Check main jet 1, main nozzle 2 and slow jet 3. for dirt,
2.
and replace if necessary.
2
1
3. Check tip of needle valve, and replace if necessary.
4. Check float for crack and damage, and replace if necessary.
CAUTION
Use cleaning solution to remove dirt. Blow
passages with compressed air to remove
dirt. Do not use wire to remove dirt.
GB
2st X18E2 2012