TOHATSU EverRu MX 18E2 Manual De Servicio página 30

Service Information
2) Measuring Instruments
For the following measuring instruments, use commercially available ones.
Circuit tester
Vernier calipers
Micrometer
Cylinder gauge
Ring gauge
Dial gauge
Thickness gauge
V block
Surface plate
Dial gauge magnet base or dial gauge stand
1-8
( Resistance : 1Ω, 10Ω, 10 kΩ, AC voltage : 30 to 300V, DC voltage : 30V, Internal voltage 3V or less )
( M1 type, 300 mm )
( minimum graduation of 0.01, outer, 0 to 25 mm, 25 to 50 mm, 50 to 75 mm )
( 4 to 6 mm, 10 to 25 mm, 25 to 30 mm, 50 to 75 mm )
( ø5.5, ø16, ø25, ø30, ø61)
( minimum graduation of 0.01 )
( 0.03 to 0.3 mm )
( 500 mm x 500 mm )
3. Tools and Instruments
1) Test Propeller
Test Propeller :
P/N. 362-64110-0
Outer : 180mm
Width : 12mm
Model
X18E2
GB
Rotational speed at WOT
(Wide Open Throttle) (r/min)
5200-5800
2st X18E2 2012