Installing Electric Parts; Installing Flywheel - TOHATSU EverRu MX 18E2 Manual De Servicio

Power Unit
5-78
1 1
1 1

33) Installing Electric Parts

1. As for the installation of the following part, refer to the step
of their removal.
• Ground wire
• CD unit
• Ignition coil and ground wire
• Spark plug
Spark plug:
25 N · m (18 lb · ft) [2.5 kgf · m]
Connect ground wire their original connecter.
Attach coil plate ass'y 1 to power unit, and tighten
2.
mounting screw.
· When reusing coil ass'y mounting screw, apply
screw lock #1342.
· Connect coil plate ass'y wire and ignition coil
wire to CD unit.
1342
1342 1342

34) Installing Flywheel

1. Attach key and flywheel to crank shaft, and tighten the nut
to specified torque.
Flywheel Puller Kit 1 :
P/N. 369-72211-0
Flywheel Nut:
80 N · m (59 lb · ft) [8 kgf · m]
Degrease tapered areas of crank shaft and
flywheel before installing them.
GB
2st X18E2 2012