Assembling Cylinder Head Parts; Installing Reed Valve And Intake Manifold - TOHATSU EverRu MX 18E2 Manual De Servicio

Power Unit
'
#
"
&
1
1 Gasket
Do not reuse.
5-72

28) Assembling Cylinder Head Parts

1. Attach cylinder head and cylinder head gasket to cylinder.
Tighten cylinder head securing bolts (M8)
order of the numbers shown.
!
%
2. Install thermostat, thermo-cap and gasket.
29) Installing Reed Valve and
Intake Manifold
Attach reed valve, intake manifold and gaskets 1 to crank
1.
case.
Temporary Tightening :
12 N · m (9 lb · ft) [1.2 kgf · m]
Final Tightening :
25 N · m (18 lb · ft) [2.5 kgf · m]
Tighten cylinder head securing bolts in two steps
to specified torque.
Thermostat cover bolt:
6 N · m (4 lb · ft) [0.6 kgf · m]
GB
to in the
10
1
2st X18E2 2012