Windows Installation; Mac Installation; Connecting Your Computer - Blackmagic Design Ultimatte 12 Manual De Operaciones

Windows Installation

1 Download the latest version of the Ultimatte software from
www.blackmagicdesign.com/support
2 Follow the install prompts and accept the terms in the license agreement and Windows
will automatically install the software.
Click the Windows 'start' button and then go to All Programs>Blackmagic Design. The folder will
contain both Ultimatte Software Control and Ultimatte Setup applications.

Mac Installation

1 Download the latest version of the Ultimatte software from
www.blackmagicdesign.com/support
2 Follow the install prompts and Mac OS X will automatically install the software.
A folder called 'Blackmagic Ultimatte' will be created within your applications folder, containing
Ultimatte Software Control and Ultimatte Setup.

Connecting your Computer

After you have downloaded the software, connect your computer's Ethernet port to your
Ultimatte using a CAT 6A or CAT 7 Ethernet cable. For 10G Ethernet ports, we recommend
a CAT 7 cable for maximum transfer speed.
For 1G Ethernet ports, connect to your computer using a standard CAT5e or CAT 6 cable.
A CAT6 cable will prevent any potential interference from nearby equipment.
Connecting to an Ethernet switch will allow you to control up to 8 Ultimatte units.
and double click the installer file.
and double click the installer file.
To install Ultimatte Software, double click
the installer and follow the prompts
Ultimatte Software Control 24