Using The Media Pool - Blackmagic Design Ultimatte 12 Manual De Operaciones

Using the Media Pool

The media pool lets you store images and assign them as sources for your composite. You can
also add transitions between two still images when they are assigned as a background and
background matte or layer and layer matte.
This section shows how to load stills and assign them as sources.
To load a still into the media pool:
1 Open the 'settings' tab in Ultimatte Software Control and click on the media button.
2 Choose 'media setup' from the groups area to open the media pool dialogue box.
3 Click the 'add media' button in the media pool tab and choose the image you want
to import.
4 Your imported image will now appear in the device storage list.
Imported images will appear in the device storage list
To delete an imported image, simply select it from the list and click on the 'remove
media' button.
To assign a still image to a source:
1 Select the assignment tab in the media window.
2 Use the destination menu to assign a still image to a background, layer or matte.
TIP A small red dot to the right of the assignment menu indicates that an
image is the current selected source for a background or layer. This helps to
make sure that you don't accidentally change a still which is currently on air
and makes it easy to identify which still will be used for the next transition.
Using the Media Pool 31