Installing Ultimatte Smart Remote Setup - Blackmagic Design Ultimatte 12 Manual De Operaciones

Installing Ultimatte Smart Remote Setup

The first step is to download the latest Ultimatte Smart Remote 4 Setup software from the
Blackmagic Design support center at www.blackmagicdesign.com/support. Copy and paste the
Smart Remote .msi file onto a portable USB storage unit, for example a USB flash drive.
Plug the USB drive into the USB port on the front of your Smart Remote 4. Smart Remote 4 will
automatically read the USB drive and open the file explorer.
NOTE The portable storage drive used to install the software on your smart remote
must be formatted as the master boot record using one single partition. Your Smart
Remote 4 recognizes NTFS, exFAT and FAT32 formats.
To install the software:
1 Double tap on the smart remote installer icon in the storage drive.
2 Tawp 'next' in the setup wizard and follow the prompts until you reach the
'install' option.
3 Tap 'install' and allow the installer to make changes to your Smart Remote 4 by tapping
'yes' when prompted.
Updating your Smart Remote 4 78