Riester RVS-100 Manual Del Usuario página 51

3.8 General Setup
3.8.1 Language settings
Select [SETTINGS] > [ADVANCED] > [Language] to access
1.
the language list.
Select the desired Language and press [OK] save the langu-
2.
age setting.
3.8.2 Setting the Date and Time
Setting the current time:
1. Select [SETTINGS] > [DEVICE] > [Settings] > [Time].
2. Set [Year], [Month], [Day], [Hour], [Minute] to the desired
value.
Select [OK] to save settings.
3.
Setting the date/time format:
Select [SETTINGS] > [ADVANCED] > [GENERAL] > [DATE/
1.
TIME]
2. Set the [Date Format] to yyyy-mm-dd, mm-dd-yyyy or dd-
mm-yyyy;
3. Set the [Time Zone] to be GMT, GMT+1, GMT+2, GMT+3, etc.
3.8.3 DEMO Modes
1. Select [SETTINGS] > [ADVANCED] > [GENERAL] > [DEMO]
to select demo type. There are three demo modes to choose
from: Monitor profile demo, Spot check profile demo, or Triage
profile demo.
Select [Start]to begin the demo.
2.
3.8.4 General Device Options
1. Select [SETTINGS] > [ADVANCED] > [GENERAL] > [OPTI-
ONAL]to view the list of options available.
2. Choose the desired options.
Select [OK] to save settings.
3.
3.8.5 Data Options
1. Select [SETTINGS] > [ADVANCED] > [DATA] to choose
whether or not the full name or abbreviation is displayed for
both the Patient and the Clinician. You can also choose to au-
tomatically send clinical information to the EMR when saving
manually, and whether or not to delete the displayed readings
after the data is sent to the EMR successfully.
Select [OK] to save settings
2.
3.8.6 Network Settings
51