Replacing The Silicone Profile On The Offset Bar - Orved Сuisson 31 Manual De Uso

MAINTENANCE AND TEChNICAl SUPPORT

11.11 REPlACING ThE SIlICONE PROfIlE ON ThE OffSET bAR

1) Open the Plexiglas cover as far as possible (95°) (fig. 1).
2) Remove the silicone profile on the offset bar (fig. 2).
3) Clean the seat with a cloth soaked in alcohol.
4) Put in a new silicone profile, pushing it in a uniform manner (fig.
3). Do not stretch the silicone profile when fitting it in.
78
Rev. 01 - 03/2018 - Cod. 1500024 - Instruction manual for vacuum chamber packaging machines for vacuum cooking mod.
fig. 1
fig. 2
fig. 3
Cuisson