Publicidad
Idiomas disponibles
Idiomas disponibles
Before you start
You should know about the following features and components before you use your range for
the first time.
Sleep mode
Sleep
After 2 minutes of inactivity (or 1 minute when the oven is in standby mode), the control panel
enters Sleep mode. In Sleep mode, the control panel is inactive, displaying only the time, until
it is reactivated by the user.
Wake-Up
Clock
You must set the clock correctly to ensure the automatic features work properly. This product
supports two time formats: 12 - hour (default) and 24 - hour.
2
Date & Time
Manual
1
16 English
To activate the control panel, push or turn the dial
knob. User preferences are available in this mode
including the timer, oven light, and control lock.
To set the clock time
1. Tap
.
2. Select Date & Time using the dial knob.
3. Enter the current time using the dial knob.
4. Push the dial knob to confirm the settings.
2
Date & Time
Manual
1
2
Use 24-hour format
12hr
1
NOTE
You can set or change the clock or the kitchen timer before you start a cooking mode or while
most cooking modes are operating. However, you cannot set or change the tizme if a time
based function is operating (Time Bake, for example) or the Sabbath option is enabled.
Oven vent/cooling vent
To set the Date
1. Tap
.
2. Select Date & Time using the dial knob.
3. Enter the current Date using the dial knob.
4. Push the dial knob to confirm the settings.
To change the time format (12hr/24hr)
1. Tap
.
2. Select Use 24-hour format using the dial
knob.
3. Turn the dial knob to select 12hr or 24hr.
4. Push the dial knob to save the changes.
The Oven/Cooling vents are located at the
back of the oven range. Proper air circulation
prevents combustion problems and ensures good
performance.
• Do not block the vent or its surroundings.
• Use caution when placing items near the
vent. Hot steam can cause them to overheat
or melt.
Publicidad
