Samsung NSY6 855 Serie Manual Del Usuario página 27

Removing the Gliding rack
NOTE
You can install the Gliding rack in any rack positions except the highest (level 7) and lowest
(level 1) rack position in the oven.
With the Gliding rack in the 'Closed' position and
the oven off and cool, grasp the rack and frame
and pull both forward to remove.
CAUTION
Do not install the Gliding rack directly above the
Flat rack and Air fry tray.
You will not be able to install it properly and the
rack could fall.
Using the divider
• To use twin mode operation, insert the divider.
• You cannot use the Self-Clean or Steam-Clean functions when the divider is installed in
the oven cavity.
• Handle the divider with both hands.
• Use oven gloves when inserting or removing the divider.
To Install the Divider into the Oven Cavity
CAUTION
If the Range displays "-dC-"
• Check the divider to see if it is installed correctly.
1. Insert the divider into the 4th rack position of
the cavity.
2. Push the divider in until its back end rests
against the back of the cavity.
3. If the divider is installed correctly, the "-" icon
appears on the display.
English 27