Replacing the oven light
Oven light
The oven light is a standard 40-watt appliance bulb. It comes on when you open the oven
door.
Remove
Remove
Replace
Replace
Glass bulb cover
Glass bulb cover
Bulb
Bulb
CAUTION
• To prevent electric shock, make sure the oven is turned off and cool before replacing the
oven light.
• When replacing the oven light, be careful not to damage the product due to excessive
force.
NOTE
• The oven light does not operate during the Self-cleaning cycle.
• Remove the racks if they prevent you from accessing the oven light.
1. Turn off the oven.
2. Make sure the oven and oven light are cool.
3. Open the door, and remove the glass cover by
turning it counterclockwise.
4. Remove the oven light from the socket by
turning it counterclockwise.
5. Insert a new 40-watt appliance bulb into the
socket, and then turn it clockwise to tighten.
6. Reinsert the glass cover, and then turn it
clockwise to tighten.
Removing and reinstalling the oven door
How to remove the door
CAUTION
• The door is very heavy. Be careful when removing and lifting the door.
Do not lift the door by the handle.
• Turn the power off before removing the door.
1. Open the door completely.
2. Pull the hinge locks down toward the door frame to the unlocked position.
Hinge lock
Locked position
Unlocked position
about 5°
about 5°
Fig. 1
Fig. 1
Fig. 2
Fig. 2
3. Firmly grasp both sides of the door at the top.
4. Close the door to the door removal position,
which is approximately 5 degrees from
vertical (Fig. 1).
5. Lift the door up and out until the hinge arms
are clear of the slots (Fig. 2).
English 55