Publicidad
Idiomas disponibles
Idiomas disponibles
Electric Oven
Before using the racks
The oven has two racks.
Each rack has stops that need to be placed correctly on the supports. These stops will keep
the rack from coming completely out.
Removing the racks
1. Pull the rack straight out until it stops.
2. Lift up the front of the rack, and then pull it out.
Replacing the racks
1. Place the end of the rack on the support.
2. Tilt the front end up and push the rack in.
26 English
CAUTION
• Do not cover a rack with aluminum foil or
place aluminum foil on the oven bottom. This
will hamper heat circulation, resulting in poor
baking, and may damage the oven bottom.
• Arrange the oven racks only when the oven
is cool.
Using the gliding rack
The fully extendable Gliding Rack makes food preparation easier, especially when you are
preparing heavier dishes. The Gliding Rack has 2 glide tracks that allow you to extend the rack
well out of the oven without touching the sides of the oven walls.
Installing the Gliding rack
Rack
Guides
With the Gliding rack in the 'Closed' position and
the oven off, carefully insert the Gliding Rack
between the guides until the rack reaches the
back.
When using the Gliding Rack in the oven, be sure
to pull on the handle of the rack only to slide it
in and out. If you grasp the frame while using the
rack, the entire Gliding Rack will be removed.
Make sure you use oven mitts when handling the
Gliding Rack during cooking.
Publicidad
