Display Daily Batch Counter; Displaying The Contents Of The Total Batch Counter; Removing The Sterilized Items - Sirona DAC PROFESSIONAL Instrucciones De Uso

Display daily batch counter

After each program has run, you will automatically see the last run batch number for the day on the
display.
You can also manually display the last batch number:
Select the "Function" set-up menu by pressing the (+) and (-) keys at the same time. The display
1.
shows the message Function: Last batch no.
Press the (P) key to display the current daily batch number.
2.
To return to the initial display, press the (S) key 2×.

Displaying the contents of the total batch counter

You can change the counter status to display the total batches completed to date:
Select the "Function" set-up menu by pressing the (+) and (-) keys at the same time.
The display shows the message Function: Last batch no.
Navigate using the (+) or (-) keys until the corresponding message appears on the display:
Press the (P) key.
1.
You can see the current counter status for the total number of batches on the display.
To return to the initial display, press the (S) key 2×.
2.

Removing the sterilized items

DANGER!
Metal parts and loads are hot at the end of the program and hot steam may escape from the
autoclave.
Risk of burns!
 It is essential to follow the instructions below for removing the sterilized items from the
autoclave.
DANGER!
If any packaging has been damaged or burst during a program run, the instruments may not be
sterile.
The health of the patient and the clinical team is at risk.
 Damaged or burst packages must be rewrapped and sterilized again.
Last batch no.
10
Total number of batches
22
Chapter 4 – Sterilizing
Programm Start-Stop
Start-Stop
Programm
23