Immediate Automatic Output Of Logs - Sirona DAC PROFESSIONAL Instrucciones De Uso

Chapter 5 – Logging
Press the (P) key to confirm. The display returns to the Log output – Output medium menu.
6.
Press the (S) key to return to the set-up menu Function: Log output.
7.
After pressing the (S) key again, the display shows the initial operating state again.

Immediate automatic output of logs

Text logs
The following conditions must be satisfied for automatic output of logs as soon as a program has ended:

In the set-up menu Function: Log output immediate output is set to YES.

At least one output medium (computer, NITRAprint log printer) must be selected as the output
medium.

The activated output medium must be connected and initialized.
If you would like to output the text log for a program as soon as the program is finished, use the
Immediate output yes function. This is not preset in the factory settings.
To set the option for immediate output of the log when the program has finished:
Switch the autoclave on at the power switch.
1.
Select the "Function" set-up menu by pressing the (+) and (-) keys at the same time.
2.
The display shows the message Function: Last batch no.
Navigate using the (+) or (-) keys until the message: Function: Log output is displayed and
3.
press the (P) key.
Navigate using the (+) or (-) keys to the message.
4.
Press the (P) key to change from immediate output no or yes.
5.
To immediately output logs, the immediate output must be set to yes.
To save the setting and leave the menu, press the (S) key.
6.
The display shows the message Function: Log output.
By pressing the (S) key again, you leave the menu completely and return to the initial operating state.
26
Output medium
Computer
Immediate output
Yes
Start-Stop
Programm
Programm Start-Stop