Publicidad
20
G)- Ba)
oO
ca)
000000 Besse @
KX
DDI
Playing a Disc
To adjust the brightness of the
4
display - DIMMER function
Press REPEAT while holding down
TIME/MEMO.
You can adjust the brightness of the display
in three levels. The level you select is kept
in memory even if you turn off the unit so
that you do not have to adjust it again.
if you have stored a disc memo
The stored disc memo will be displayed
following the display of the remaining time
of the disc.
Locating a Particular
Selection
C
You can locate the beginning of a desired
selection in two ways.
a) To locate sequentially
To locate the beginning of the
current or preceding selection
e Press k<@ as many times as required.
¢ Keep K@<@ pressed to skip selections.
To locate the beginning of a
subsequent selection
¢ Press BPI as many times as required.
e Keep PI pressed to skip selections.
b) To locate directly
Press one of the numeric buttons (J to
[20]) to enter the desired selection
number.
if a selection nurnber is greater than 20,
use
and [4] to [10]. [70] functions
as the figure 0.
e.g. To play from selection No.22
Press[>20] and [2] [2].
e.g. To play from selection No.30
Press[>20] and [3] [70].
Publicidad
