Publicidad
GIC- TSR
o
EDIT/TIME FADE
LA]
CONTINUE
TRACK
2-A
CONTINUE
TRACK
,
teen!
CONTINUE
CONTINUE
TRACK
a,
[1T2}3t4is}
[6{7 {sig iro
56
Designating the Total
_
Playing Time
Ka
You can designate a playing time and the
unit will make two different programs of
selections each fitting within that period.
These programs can contain up to a total of
24 selections. Use this function, by ~
designating the length of your tape, for
editing both sides of a tape.
There are two types of editing: Time edit
and Just edit. See page 44.
You can also program desired selections by
priority. In this case, you can designate
desired selections beforehand and the
ramaining selections will be programmed to
fit in the remaining time.
A blank space of 3 seconds will be added
after each selection when making programs
with the auto space function. The playing
time of each selection will increase by 3
seconds. Consequently, the increased
playing time will appear in the display (see
page 24).
In addition, the unit edits remaining
selections when you delete unwanted
selections in shuffle piay mode beforehand
(see page 28).
After each step, you can see the proper
operation guide of what you should do next
(see page 62).
Operating Time Edit/Just Edit
1 Press EDIT/TIME FADE and display
"TIME EDIT" or "JUST EDIT".
To choose time edit, press
EDIT/ TIME FADE once.
"TIME EDIT" appears in the display.
To choose just edit, press
EDIT/ TIME FADE twice.
"JUST EDIT" appears in the display.
2 Designate the length of one side of
your tape.
A When setting your desired time
Use numeric buttons.
Press [10] for "0".
It is generally not necessary to press
numeric buttons for seconds.
B When using a commercial tape
You can designate the tape length
easily with k@<@ or PI,
Each time you press k@<@ or BB the
display changes to give you the
foliowing durations:
x
HALF
DISC «> C-46 a
C-54 ed
(23.00 min)
(27.00 min)
---- +© 0-90 ++ C-74++C-60
(45.00 min)
(37.00 min)
(30,00 min)
(continued)
Publicidad
