Publicidad
58
3
EDIT/TIME FADE
iA
4
EDIT/TIME FADE
in
PROGRAM
SDOoRRMma
Fe
(())
PROGRAM
PROGRAM
MIN
ere,
:
Designating the Total
Playing Time
3 Press EDIT/TIME FADE.
The selections for side A are determined
automatically.
Note
">" may light during editing. But this is nota
malfunction.
4 Press EDIT/TIME FADE once more.
A pause is programmed and another
program for the other side is completed.
When you select HALF DISC
The playing time of each program is set toa
half of the total playing time of the disc.
However, programming for time edit and
just edit are performed in different ways.
Time edit: divides all the selections of the
disc into two programs without changing
their order.
Just edit: programs selections by changing
their order so that the length of each
program becomes half the total playing
time of the disc. However the program
for side A will be a little longer than that
of side B since the unit distributes all the
selections.
Note
HALF DISC cannot be set on a disc with more
than 24 selections.
On the displayed total playing time
Selections played consecutively but which are
not numerically consecutive (i.¢. 1, 3, 5, etc.)
have a one second access time blank added
between each one. This increase is automatically
added to the displayed total playing time.
If the auto space function is on, afl the spaces
between selections become 3 seconds long, and
the extra time is added to the displayed total
playing time.
To add selection(s) — LINK edit
After all selections on the disc have been
programmed, if there are selections shorter
than the remaining time, "LINK" and the
selection numbers will blink.(See Fig. EN)
You can add the selection(s) by pressing
EDIT/TIME FADE once more, or the
numeric buttons for these selections to
utilize the remaining time.
You can replace the disc by another disc
and choose selection(s) to fit the remaining
time. If you don't add any selection, press
a.
"EDIT" goes off when the rest of the playing
time is less than 1 minute.
Publicidad
