Publicidad
COooomemso
COomoooms
om
Q00000 sssssss
MULTI
PROGRAM
92
Designating the Playing
Order of Up to 6 Discs
Playing the Program
1 Place the first disc.
2 -Press >.
When the last selection on the first disc
is over, "NEXT DISC" appears in the
display.
3 Replace the first disc with the next
one and press P.
Continue replacing until the last disc.
After the last disc has been played,
"-END-" appears in the display and the
unit returns to the initial standby
condition.
To play the selections for side B
When the selections for side A are played,
the unit enters pause mode ('B" lights up.).
Set the tape to the beginning of side B, then
press ® orl,
To stop play
Press @.
To check your program
Each time you press CHECK, the seiection
in the program will be displayed along with
its selection number, order and disc
number.
When CHECK is pressed after the last
selection,"-END-" appears and then the
display returns to the initial display.
To cancel the multi-dise program
Press CONTINUE and return to the
continuous play mode. The program will be
erased.
To check the remaining time in
multi-disc program play
Press TIME/MEMO (or TIME) once to see
the remaining time of the selection being
played; twice to see the remaining time of
the disc being played. The remaining time
of the program cannot be displayed for
multi-disc programs.
To check the current disc number
Press TIME/MEMO (or TIME) during stop.
The disc number will be displayed.
Publicidad
