Publicidad
62
Designating the Total
Playing Time
Edit Navigation Display
1 Press </>
or one of the numeric
buttons ([1] ~ [f0]) to set the recording
time.
Press EDIT/TIME FADE to edit side A
(or B).
Add selections by using the numeric
buttons ([1] ~ 20]) or change the disc.
This message means that all the
selections are programmed and more
can be programmed (Link edit).
1'22" (example) remains but no
selection from the disc can be
accommodated.
Press the EDIT/TIME FADE to end.
This message appears after
programming selections for side B,
when more than 1 minute remains and
when there is no selection fitting in the
time on the disc, You can replace the
disc to program the selection fitting in
the time from another disc. If there are
same selection fitting in the time,
selection numbers will appear in the
diplay.
5 Editing is done.
Publicidad
