Publicidad
Designating the Playing
Order of Up to 6 Discs
You can program selections on one disc
after another (Multi-disc program). You can
choose up to 24 selections from up to 6
discs for playing in any desired order.
1 Place the first disc.
2 Press PROGRAM.
3 Program desired selections on the
first disc.
Press the appropriate numeric buttons
or press K@<@ or PI and PROGRAM.
For details see page 32.
The display shows:
a) The last programmed selection
b) The order to be played
c) The total playing time
d) Programmed selection numbers
4 Replace the first disc with the second
2
PROGRAM
one:
re
"MULTI PGM" appears for a second and
"MULTI PROGRAM" lights up in the
display. When you insert the second
disc, "x DISC-2 * " appears.
5 Repeat steps 3 and 4 to program
other selections.
,
Up to 24 selections from up to 6 discs
3
;
can be programmed.
To program selections recorded on side
PROGRAM
B
Press il to put a pause and then program
=
selections to be recorded on side B.
if you press B by mistake when
inserting the second disc
The multi-disc program will be overridden
by the continuous play mode. Note that the
programmed selections on the first disc will
be cancelled at this time.
To program selections on the first disc
again
You can program selections on the first disc
again
When you set auto space function
The auto space cannot be set during multi-
disc programming. Be sure to sei the auto
space before programming. (See page 24.)
MULTI
PROGRAM
The following functions cannot be
conducted on Multi-disc programs
e Repeat play
e Program bank
50
Publicidad
