Easy Troubleshooting - WMF Silit Sicomatic t-plus Indicaciones De Manejo Y Cuidado

12 | Easy troubleshooting

What do I do if...
the lid is very difficult to close.
After closing, you cannot move the slider to the desired
cooking level 0, 1 or 2.
Heating takes too long
Steam and droplets of water are constantly released at
the lid rim when parboiling (if just a little escapes, this is
irrelevant and does not indicate a malfunction).
Pressure indicator does not rise or does not rise enough
Steam and droplets of water are constantly released at
the pressure indicator.
30
It can be due to one of the following causes
→ Poor running quality of the lid gasket.
→ Lid and pot shaft handles are not correctly
aligned.
→ The pressure display is lifted up and sticks out
of the handle.
→ Handle is damaged
→ Power setting too low.
→ Foreign objects on the lid gasket, cooker rim
and inner lid rim.
→ Lid gasket is hard, brittle or damaged.
→ The seal on the lid shaft handle is damaged.
→ Slider is still in initial position.
→ Power setting too low.
→ Not enough liquid to generate steam.
→ Lid gasket is hard, brittle or damaged.
→ The aroma sealing cap is defective.