Switching Between Main Modes; Prompt Screens; Clock Mode; Setting The Clock - Oregon Scientific SmartHeart SE120 Manual De Usuario

SWITCHING BETWEEN MAIN MODES

There are 6 main modes. Each main mode displays
a banner screen telling you which mode you are
entering. After 1 second the banner screen is
automatically replaced by the main mode screen. Press
MODE to switch between the main modes:
MODE BANNER MAIN
MODE
CLOCK
STOP-
WATCH
USER
PROFILE
The modes are described in the sections that follow.
NOTE You cannot run the Timer or Stopwatch at the
same time. If you have been using the Timer and do not
reset it after use, you will not be able to view the main
mode stopwatch screen and vice-versa.
MODE BANNER MAIN
MODE
TIMER
MEMORY
ALARM

PROMPT SCREENS

In some Main Mode and Setting displays a prompt
screen will appear when you press SET. Press and hold
SET if you wish to enter and proceed with the prompt
action or press MODE to exit this display.
SCREEN
DISPLAY
CLOCK / ALARM
/ USER PROFILE
MAIN MODE
TIMER / STOP-
WATCH MAIN
MODE
TIMER / STOP-
WATCH SETTING
MODE
MEMORY MAIN
MODE

CLOCK MODE

SETTING THE CLOCK

The real-time clock is the default display for the watch.
To set the real-time clock:
7
PROMPT PROMPT
SCREEN ACTION
Enter Clock / Alarm
/ User Setting
Mode
Reset Timer /
Stopwatch
Enter Timer /
Stopwatch Setting
Mode
Delete total calorie and
fat burn or individual
memory, i.e., MEM.1