Service Settings; Other Settings; Patient Management; Adding A Patient - Riester RVS-100 Manual Del Usuario

1. Select [SETTINGS] > [ADVANCED] > [NETWORK] to set the
network to be [Wired Network] or the [Wireless Network].
2. Select [SETTINGS] > [ADVANCED] > [NETWORK]> [IHE
Setting], in this interface set the network server to be [PCD
Server] / [PDQ Server].
3. Select [OK] to save settings.

3.8.7 Service settings

1. Select [SETTINGS] > [ADVANCED] > [SERVICE] to reset
factory default settings (not recommended), import and export
the configure files by USB, or import configuration settings
from a USB drive. In the [SERVICE] menu, you can also see
the device logs and other information about the device.

3.8.8 Other settings

1. Select [SETTINGS] > [ADVANCED] > [PARAM] > [OTHERS]
to set the [Height Unit] and the [Weight Unit].
2. Select [OK] to save settings.

4. Patient Management

4.1 Adding a Patient

To add a patient,
1. Select [PATIENT] > [Add]. The patient information window
will pop up.
2. Enter or select the patient information:
Patient ID: The system can automatically produce an ID for
the patient. The ID can also be manually entered.
First Name: Enter the patient's first name.
Last Name: Enter the patient's last name (family name).
Age: Enter the patient's birthday.
Gender: Choose [Male] or [Female].
Patient Type: Choose the patient category, either [Adult],
[Pediatric] or [Neonate].
Select [OK] to add the new patient.
Caution: The patient type determines which measurement
algorithms, safety limits, and alarm limits the device will
use during operation.
Caution: The number of patients who can be entered de-
pends on the device's storage space.

4.2 Patient manage

When the patient is added, the patient information will automatical-
ly populate the patient interface (see the following picture):
You can conduct any of the following operations:
Select [View All]: Can view the last 1 day, last 7 days, or all the
patients. Even you can choose the keyword search to find the exact
one you need.
Select [Delete]: Select one or more pieces of patient information
to delete it.
Select [Modify]: Select one piece of patient information to modify it
[except the patient ID].
Caution: Do not attempt to delete or modify that patient
that is currently being monitored.
Select [Select]: Select one piece of patient information. The system
automatically will go to the home screen. Monitoring of the selected
patient will begin immediately.
Select [Discharge]: Discharges the current patient.
Select [Print]: Prints the patient information and measurement
data about the selected one;
Select [Last page]: Checks the patient information of the last page;
Select [Next page]: Checks the patient information of the next page;
46