Alarm Levels; Alarm Indicators - Riester RVS-100 Manual Del Usuario

6.2 Alarm Levels

The monitor's physiologic alarms are classified into three catego-
ries according to the severity of the alarm issue.
High level alarms: Indicate that the patient is in a life-threatening
situation and an emergency treatment is necessary. This is the
highest level alarm.
Medium level alarms: Indicate that the patient's vital signs appear
abnormal and an immediate treatment is required.
Low level alarms: Indicate that the patient's vital signs appear ab-
normal and an immediate treatment may be required.
The monitor's technical alarms are classified into three catego-
ries: high level, medium level and low level. Technical alarm levels
are predefined at the factory and can't be changed by users.
The alarm levels are as follows:
Physiological alarm
SpO lower alarm limit
2
exceeded
NIBP SYS high /low
NIBP DIA high /low
NIBP MAP high /low
PR high /low
SpO high /low
2
TEMP high /low
Search timeout

6.3 Alarm Indicators

When an alarm occurs, the monitor will indicate it through the fol-
lowing means:
Alarm tone: According to the alarm level, alarm sounds of different
tones will emit from the speaker.
Alarm Light: According to the alarm level, the alarm LED light on
the monitor will flash in a different color and speed.
Alarm message: Alarm messages will be displayed on the screen.
Caution: The exact nature of the alarm depends on the
specific alarm level.
53
Alarm level
High
Medium
Medium
Medium
Medium
High
Low
High
6.3.1 Alarm Tones
The device will make the following sounds for different level alarms:
)538>931< 1<1B=
9LL=JQ (GO
# %
/=D> 0=KL !JJGJ
/QKL=E "9ADMJ=
(GGK= M>>
AJ (=9C
AJ ,J=KKMJ= !JJGJ
3=9C /A?F9D
.9F?= !P;==<=<
!P;=KKAN= )GLAGF
+N=JHJ=KKMJ= =L=;L=<
/A?F9D /9LMJ9L=<
0AE= +ML
M>> 0QH= !JJGJ
6=JG 9DA:J9LAGF !JJGJ
9DA:J9LAGF "9ADMJ=
$9J<O9J= GN=JHJ=KKMJ= 6=JG
9DA:J9LAGF !JJGJ
$9J<O9J= GN=JHJ=KKMJ=
9DA:J9LAGF "9ADMJ=
(@$
/=FKGJ G>>
/H+ /=9J;@AF? >GJ HMDK=
)"%
1HH=J 9D9JE DAEAL =P;==<=<
(GO=J 9D9JE DAEAL =P;==<=<
0!), )G<MD= "9ADMJ=
<1B= <5F5< E492<5 @B?=@D
\ + + + + +
$A?@
+ +]
)=<AME \ + + +]
(GO \ + ]
6.3.2 Alarm Lamp
The device has two alarm lamps; one flashes as red/yellow, and the
other flashes as cyan. When a physiologic alarm occurs, the alarm
levels are indicated in the following visual ways:
<1B= <5F5<
$A?@
(GO
(GO
(GO
(GO
(GO
(GO
(GO
(GO
(GO
(GO
(GO
(GO
(GO
(GO
(GO
(GO
)=<AME
(GO
(GO
(GO
(GO
+ + +