Boston Scientific Precision Montage MRI Informacion Para Medicos página 16

Information for Prescribers
NOTE 1 At 80 MHz and 800 MHz, the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by
absorption and reflection from structures, objects and people.
a The ISM (industrial, scientific and medical) bands between 0.15 MHz and 80 MHz are 6.765 MHz
to 6.795 MHz; 13.553 MHz to 13.567 MHz; 26.957 MHz to 27.283 MHz; and 40.66 MHz to 40.70 MHz.
The amateur radio bands between 0.15 MHz and 80 MHz are 1.8 MHz to 2.0 MHz; 3.5 MHz to
4.0 MHz; 5.3 MHz to 5.4 MHz; 7.0 MHz to 7.3 MHz; 10.1 MHz to 10.15 MHz; 14 MHz to 14.2 MHz;
18.07 MHz to 18.17 MHz; 21.0 MHz to 21.4 MHz; 24.89 MHz to 24.99 MHz; 28.0 MHz to 29.7 MHz;
and 50.0 MHz to 54.0 MHz.
b Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless)
telephones and land mobile radios, amateur radio, AM and FM radio broadcast and TV broadcast
cannot be predicted theoretically with accuracy. To assess the electromagnetic environment due to
fixed RF transmitters, an electromagnetic site survey should be considered. If the measured field
strength in the location in which the Precision Montage MRI Spinal Cord Stimulator System is used
exceeds the applicable RF compliance level above, the Precision Montage MRI Spinal Cord Stimulator
System should be observed to verify normal operation. If abnormal performance is observed, additional
measures may be necessary, such as re-orienting or relocating the Precision Montage MRI Spinal
Cord Stimulator System.
c Over the frequency range 150 kHz to 80 MHz, field strengths should be less than 3 V/m.
Precision Montage™ MRI System Information for Prescribers
91053246-04 12 of 403
Field strengths from fixed RF transmitters,
as determined by an electromagnetic
site survey, should be less than the
b
compliance level in each frequency
range. Interference may occur in the
c
vicinity of equipment marked with the
symbol shown below: