Digital Heart Rate Sensor Battery - Timex IRONMAN M103 Manual Del Usuario

• Do not subject the Digital Heart Rate Monitor to excessive force,
shock, dust, temperature, or humidity. Such treatment may
result in malfunction, a shorter electronic life span, damaged
batteries, or distorted parts.
• Do not tamper with the Digital Heart Rate Monitor's internal
components. Doing so will terminate the Monitor's warranty
and may cause damage.
• The Digital Heart Rate Monitor contains no user-serviceable
parts, except batteries.

digital heart rate sensor battery

If your heart rate readings become erratic or stop, you may need
to replace the battery on your Digital Heart Rate Sensor. You can
change the battery yourself without any special tools.
This product uses a CR2032 lithium battery for the Digital Heart Rate
Sensor. To change the battery:
BATTERY
OPEN
BATTERY
28
1. Open the Sensor battery lid with a coin, turning the coin counter-
clockwise.
2. Replace the battery with a new CR2032, 3V lithium battery with
(+) facing you, taking care not to touch the two contacts and
discharge the battery.
3. When you have finished inserting the battery, press the reset
button (located in the lower left corner) with a toothpick or
straightened paper clip and close the lid with a coin -- screwing
in a clockwise direction.
To test the new battery after you have inserted it:
1. Move away from any possible sources of electrical or radio
interference.
2. Wet the Digital Heart Rate Sensor pads and securely fasten the
chest strap below your sternum.
3. While wearing the watch, press the HEART RATE button. A set of
three dashes (- - -) and the flashing heart rate icon will appear on
the display.
4. If you do not see a flashing heart icon on your watch, reinstall the
sensor battery.
NoTE: It is not necessary for a heart rate value to appear on the
display during this test.
29