DJO ARTROMOT-S4 Modo De Empleo página 101

Lockout function
With the lockout function, access to individual operating modes or functions can
be blocked. This reduces the scope of programming options and makes opera-
tion easier.
To activate the lockout function, simultaneously press the MENU and STOP
buttons for 3 seconds while the device is switched on. The device must be in the
stop mode. The display automatically shows the lockout menu.
The individual functions/menus can be locked and unlocked by tapping the slider
below the appropriate symbol.
When the field is green, the function/menu is enabled and NOT locked. When
the slider is touched, the color changes to gray and the corresponding function/
menu is locked.
It is possible to lock more than one function/menu at a time.
A padlock in the status bar indicates the locked status.
Default setting: all functions/menus active (not locked)
The following functions/menus can be locked:
If deactivated, the main menu level is locked.
The ranges of motion can still be selected by tapping the appro-
priate field on the display while the device is in stop mode; the
Menu
displayed view can also be changed. No other modifications are
possible.
If deactivated, angles cannot be set; the same applies if a motor
is deactivated.
All other functions/menus are not affected.
Angle
If deactivated, the view currently selected for the display is
locked.
Displayed
View
If deactivated, the "Expert" menu is locked.
The ranges of motion, timer, speed and displayed view can still be
changed.
Expert
If deactivated, activation and deactivation of the motors is
locked.
All other functions/menus are not affected.
Motor
ON/OFF
If deactivated, adjustment of the ranges of motion by means of
the motor controls is locked.
All other functions/menus are not affected.
Motor
Controls
99