13. Reinsert the two locking pins.
Note!
– Reverse the above steps to reassemble
the device after transport.
– When the CPM device is reassembled
after the transport (only step 1 is left)
and switched on, the display prompts
you to indicate whether the motion
element is mounted on the right or on
the left.
1. Indicate the appropriate side: the
motion element will automatically
move to the position in which the
forearm support can be mounted.
2. Install the forearm support.
3. Press the START button: the device
automatically moves to the starting
position (similar to "New Patient"
function).
6.3.2.2 Packaging
The ARTROMOT®-S4 is transported in 3
shipping boxes.
Box 1
Content:
– Chair
– Armrest for healthy arm
– Power cord
Packaging:
1. Put the power cord and the components
of the armrest for the healthy arm in the
cut-outs provided in the box.
2. Place the ARTROMOT®-S4 – legs first –
into the box. The markings on the bottom
of the box indicate the correct position.
3. Then close the box.
Box 2
Content:
– System rack
– Headrest
– Crank handle for adjusting the depth of
the backrest
Packaging:
1. Push the system rack into the box.
2. Place the headrest and the crank handle
in the cut-outs provided for these parts.
3. Then close the box.
107