Aiwa NSX-4000 Manual De Instrucciones página 20

B
B
B
_o_u nl
2O
J
DEMO
BEFORE OPERA TION
CASSETTE TAPES
Usable tapes
For playback, use normal (type 1),CrO= (type 1]),and metal (type
IV) tapes.
The proper bias and equalization to suit the type of tape are
selected automatically.
For recording, use a normal (type D tape,
Tape slack
Take up anyslack inthe tape witha pencilorsimilartoolbeforeuse.
Slack tape may break or jam in the mechanism._ []
120-minute or longer tapes
These are extremelythina!ld easily deformedor damaged. They
are not recommended.
To prevent accidental erasure
Break offthe plastictabs on the cassette tape after recording,with
a screwdriveror other pointedtool. _ []
• Side A
(_) Tab for side A
To record on the tape again, cover the tab openings with cello-
phane tape. |
DEMO(DEMONSTRATION)MODE
When you first connect the AC cord, the display window demon-
strates the unit's preset functions.
When the power is turned on, the DEMO display is hidden by the
operation display. When the power is turned off, it is restored.
To cancel DEMO mode _ []
Press the DEMO button.
To reenter DEMO mode
Press the DEMO button again.
After a power Interruption
The unitenters DEMO mode.
DIRECT P LAY FUNCTIONS
You can turnthe uniton andstartplaybackimmediatelybypressing
one of the directplay buttons. Press the TUNER/BAND buttonto
listen to the tuner, the TAPE button to listento a tape, or the CD
buttonor DISC DIRECT PLAY buttonsto listen to discsloaded in
the disc compartment.
If the power is on, pressing the CD button or the TAPE button
selects a sourceto be played. Press the 41_ buttonto startplay.