Cooktop Maintenance
Round Burner Head / Caps
After assembling the burners, test for proper function. Improper assembly of parts will
cause poor ignition or uneven flames (see below). If the flame is excessively yellow,
shut off the burner immediately and let it cool. Adjust the burner caps and relight the
burner. A good flame is blue and even all around the burner.
Bad example
84
English
DG68-01509A-00_IB_DOP48T960G_EN+MES+CFR.indb 84
DG68-01509A-00_IB_DOP48T960G_EN+MES+CFR.indb 84
1. Put the burner heads on the burner
bases as shown at left. (The bottom
of the head fits inside the top of the
base.)
2. Twist each head back and forth
slightly until it drops into place.
3. Place the burner caps atop the burner
rings. The ridge around the bottom
of each cap fits around the top of the
ring.
2023-04-07 오후 12:02:37
2023-04-07 오후 12:02:37