Descargar Imprimir esta página

Dacor Transitional Pro DOP48 960G Serie Manual Del Usuario página 91

Publicidad

Idiomas disponibles

Idiomas disponibles

Removing/Re-installing the Oven Door
Spread a blanket on a stable, flat surface where you can lay the door once you have
removed it.
CAUTION
Grasp the door with both hands. Do not lift by the handle.
Locked
Locked
DG68-01509A-00_IB_DOP48T960G_EN+MES+CFR.indb 91
DG68-01509A-00_IB_DOP48T960G_EN+MES+CFR.indb 91
1. Open the oven door fully.
2. In the bottom corners of the oven
Unlocked
Unlocked
3. Partially close the door to engage the
4. Grasp the sides of the door below the
5. Set the door down without damaging
6. Disconnect the cable's wire harness
Step 6
7. When ready to re-install the door,
Step 8
8. Set the door down and connect the
door, flip the hinge locks toward you
to unlock them. If the hinge locks are
not fully forward (see left), you cannot
remove the door.
hinge locks. (The door stops at this
point.)
handle and as you pull, gently jiggle
the door side to side as needed to
loosen it.
the LED cable at the door's bottom
right corner.
and set the door (handle-down), on
the blanket you prepared.
stand at the top of the door, grasp
each side below the handles and take
the door to the oven.
wire harness.
English 91
2023-04-07 오후 12:02:39
2023-04-07 오후 12:02:39

Publicidad

loading