Dacor Transitional Pro DOP48 960G Serie Manual Del Usuario página 97

Information Codes
Information
Code
Oven sensor malfunction.
Door lock malfunction.
PCB signal malfunction.
C-30 Check the PBA NTC Sensor.
Touch IC and PCB signal malfunction.
C-22 Check the Control PBA NTC
Sensor.
Temp probe malfunction.
The oven is overheating.
C-31 Check the PBA NTC Sensor.
Check the cooling system.
Control pad malfunction.
DG68-01509A-00_IB_DOP48T960G_EN+MES+CFR.indb 97 DG68-01509A-00_IB_DOP48T960G_EN+MES+CFR.indb 97
Meaning Solution
1. Turn knob Off and restart
the oven.
2. If the problem persists,
disconnect all power
to the oven for at least
30 seconds and then
reconnect the power.
3. If this does not solve the
problem, call for service.
Call for service.
1. Clean the buttons and
make sure there is no
water on/around them.
2. Turn Off the oven and dry
again.
3. If the problem continues,
contact a local Dacor
service center.
English 97
2023-04-07 오후 12:02:40 2023-04-07 오후 12:02:40