Yamaha WR250F Manual De Servicio Del Propietario página 37

Ocultar thumbs Ver también para WR250F:

YS-1880-A, 90890-01701

Tool name/How to use

This tool is used for when loosening or tightening the

flywheel magneto securing nut.

Use this tool to inspect the coil resistance, output

voltage and amperage.

This tool is necessary for checking ignition timing.

This tool is needed to remove and install the valve

This tool is used to hold the clutch when removing or

installing the clutch boss securing nut.

Intake 4.0 mm (0.16 in)

Exhaust 4.5 mm (0.18 in)

This tool is needed to remove and install the valve

Intake 4.0 mm (0.16 in)

Exhaust 4.5 mm (0.18 in)

This tool is needed to install the valve guide.

Intake 4.0 mm (0.16 in)

Exhaust 4.5 mm (0.18 in)

This tool is needed to rebore the new valve guide.

This tool is used to remove the flywheel magneto.

SPECIAL TOOLS

Illustration

Capítulos

Wr250fw 5ume 5umf 5umg