Gram IF 4000 Manual De Uso página 239

3-12 Programming and Parameters
Basic Program Group
P040 [Decel Time 1]
Sets the rate of deceleration for all speed decreases.
Maximum Freq
=
Decel Rate
Decel Time
Values Default
Min/Max:
Display:
[Maximum Freq]
Speed
0
[Accel Time]
0
Stop drive before changing this parameter.
P041 [Reset To Defaults]
Resets all parameter values to factory defaults.
Options 0 "Idle State" (Default)
1 "Reset Defaults"
(continued)
Related Parameter(s): P038, P039, A051, A052,
10.0 Secs
0.1/600.0 Secs
0.1 Secs
[Decel Time]
Time
• After the reset function is complete, this parameter will set
itself back to "0".
• Causes an F48
Params Defaulted fault.
A068