Gram IF 4000 Manual De Uso página 346

Advanced Program Group
A085 [Start Boost]
Sets the boost voltage (% of
[Boost Select] = 0 "Custom V/Hz" and A125 [Torque Perf Mode] = 0 "V/Hz".
Drive may add additional voltage unless Option 5 is selected.
Values Default
Min/Max:
Display:
A088 [Maximum Voltage]
P031 [Motor NP Volts]
A034 [Minimum Freq]
A086 [Break Voltage]
Sets the frequency where break voltage is applied when A084 [Boost Select] = 0 "Custom V/Hz" and
A125 [Torque Perf Mode] = 0 "V/Hz"
Values Default
Min/Max:
Display:
A087 [Break Frequency]
Sets the frequency where break frequency is applied when A084 [Boost Select] = 0 "Custom V/Hz"
and A125 [Torque Perf Mode] = 0 "V/Hz"
Values Default
Min/Max:
Display:
P031 [Motor NP Volts]) and redefines the Volts per Hz curve when A084
2.5%
0.0/25.0%
1.1%
A087 [Break Frequency]
Frequency
25.0%
0.0/100.0%
1.1%
15.0 Hz
0.0/400.0 Hz
0.1 Hz
Programming and Parameters
(continued)
Related Parameter(s): P031, P032, P034, P035,
A084, A086, A087, A088,
P032 [Motor NP Hertz]
P035 [Maximum Freq]
Related Parameter(s): P031, P032, P034, P035,
A084, A085, A087, A088,
Related Parameter(s): P031, P032, P034, P035,
A084, A085, A086, A088,
3-25
A125
A125
A125