Gram IF 4000 Manual De Uso página 350

Advanced Program Group
A100 [Fault Clear]
Stop drive before changing this parameter.
Resets a fault and clears the fault queue. Used primarily to clear a fault over network communications.
Options 0 "Ready/Idle" (Default)
1 "Reset Fault"
2 "Clear Buffer"
A101 [Program Lock]
Protects parameters against change by unauthorized personnel.
Options 0 "Unlocked" (Default)
1 "Locked"
A102 [Testpoint Sel]
Used by Rockwell Automation field service personnel.
Values Default
Min/Max:
Display:
A103 [Comm Data Rate]
Sets the serial port rate for the RS485 (DSI) port.
Important: Power to drive must be cycled before any changes will affect drive operation.
Options 0 "1200"
1 "2400"
2 "4800"
3 "9600" (Default)
4 "19.2K"
5 "38.4K"
A104 [Comm Node Addr]
Sets the drive node address for the RS485 (DSI) port if using a network connection.
Important: Power to drive must be cycled before any changes will affect drive operation.
Values Default
Min/Max:
Display:
Programming and Parameters
(continued)
(Parameters d007-d009
400
0/FFFF
1 Hex
100
1/247
1
[Fault x Code])
Related Parameter(s):
Related Parameter(s):
Related Parameter(s):
3-29
d019
d015
d015