Display Group - Gram IF 4000 Manual De Uso

Display Group

d001 [Output Freq]
Output frequency present at T1, T2 & T3 (U, V & W).
Values Default
Min/Max:
Display:
d002 [Commanded Freq]
Value of the active frequency command. Displays the commanded frequency even if the drive is not
running.
Important: The frequency command can come from a number of sources. Refer to
Reference Control on page 1-20
Values Default
Min/Max:
Display:
d003 [Output Current]
The output current present at T1, T2 & T3 (U, V & W).
Values Default
Min/Max:
Display:
d004 [Output Voltage]
Output voltage present at terminals T1, T2 & T3 (U, V & W).
Values Default
Min/Max:
Display:
d005 [DC Bus Voltage]
Present DC bus voltage level.
Values Default
Min/Max:
Display:
Related Parameter(s): d002, d010, P034, P035,
Read Only
0.0/P035 [Maximum Freq]
0.1 Hz
Related Parameter(s): d001, d013, P034, P035,
for details.
Read Only
0.0/P035 [Maximum Freq]
0.1 Hz
Read Only
0.00/(Drive Rated Amps × 2)
0.01 Amps
Read Only
0/Drive Rated Volts
1 VAC
Read Only
Based on Drive Rating
1 VDC
Programming and Parameters
Related Parameter(s): P031, A084,
3-3
P038
P038
Start and Speed
A088