Steering Angle - SICE A 948 Manual De Instrucciones

Recalls the window for selection of the vehicle from the databank.
Displays the window for checking of the calibration of the mechanical values.
Skips vehicle selection from the databank by selecting "typical vehicle" mode.
Locks out the data to allow levelling of the sensors.
Releases the data locked out earlier to allow levelling of the sensors.
Opens the job record for input of the customer and vehicle data
Aborts the job in progress and returns to the "starting screen".
Exits the aligner program and Windows, initiating the correct power-down
procedure (available only from the starting screen)
Returns to the window which opened a list of options (only available in windows
with a list of options)
The tables below provide a list of the icons available in the windows, with a list of options
(menus for skipping between windows) and the description of the relative functions.
SYMBOL
Data summary: (Displays the window which summarises the adjustment data
for the current vehicle).
Databank: (Displays the window for selection of a vehicle from the databank).
Databank Summary: (Displays the window with the adjustment data for the
current vehicle, taken from the databank).
Steering angle: (Displays the window for performance of the steering lock for
measurement of the caster, king pin, included angle and maximum steering angle).
Rear Axle: (Displays the rear axle adjustment window).
Front Axle: (Displays the front axle adjustment window).
Ballast and fuel: (Displays the window for ballast location and the amount of fuel.
only available for vehicles which require ballast and/or known amounts of fuel)
MENU AVAILABLE IN JOB STATUS
FUNCTION DESCRIPTION
24