SICE A 948 Manual De Instrucciones página 107

The "Save Data" procedure can be carried out in compressed mode (zip format) or by simply
making an exact copy of the files, without zipping them.
For the automatic mode, the following functions can also be set up:
1. how often the program should perform the "Save Data" procedure
2. confirmation request to the user before filing.
A) "Save Data" procedure setting up
To set up the "Save Data" procedure, proceed as follows:
1. From the starting screen (Logo screen), press "F8"
2. Select the "Save Data" option with the ↑ or ↓ arrows
3. Press "Enter" ↵ to confirm.
The screen on figure 51 will be displayed.
N.B.: To move through the different objects (boxes) present on the screen, use
the tab key.
4. With the ↑ or ↓ arrows, select, in the box "B", the disc where you wish to save
"Data Saving".
5. With the ↑ or ↓ arrows, select, in the box "C", the folder where you wish to save
"Data Saving".
6. Press "Enter" ↵ to confirm.
The data filing path is displayed in full in the box "A"
7. In the box "D", it is possible to select automatic filing (Data Saving) using the space
bar.
8. In the box "E", indicate how often you wish to perform "Data Saving" using the
numeric keypad.
9. In the box "F", it is possible to select whether or not to ask if you wish to perform
automatic filing (Data Saving) pressing the space bar.
10. In the box "G", it is possible to select whether the information (Data Saving) is filed
in compressed format (zip) or as a simple copy of the files, pressing the space bar.
11. After setting your own choices, press "F6"
12. Press F3 to confirm.
13. Press "F2", to exit the "Save Data" settings screen and go back to the "Service"
screen.
14. Press "F2" to go back to the starting screen (logo screen)
Note: in this stage, it is also possible to perform "Data Saving" manually, carrying out
before step 13, the following operations:
a) Press "F5"
b) Press "F3" or "Enter" ↵ to confirm.
Note: Find an example of an screen with all the settings on fig. 52.
B) "Save Data" manual execution
To perform "Save Data" manually, proceed as follows:
1. From the starting screen (Logo screen), press "F8"
2. Select the "Save Data" option with the ↑ or ↓ arrows
3. Press "Enter" ↵ to confirm.
The screen on figure 51 will be displayed.
49