SICE A 948 Manual De Instrucciones página 81

Increases the rim diameter measurement
Scrolls up to the next item in a list (only available in windows with a list of
options)
Displays the Make - Vehicle - Customer modification window
Transmits data between the PC and the (optional) chassis height and angle
measurement instrument
Displays the vehicle record window.
Runs the rear spoiler procedure (the key only appears when the rear transverse
goniometers do not give a reading)
Displays the vehicle adjustment window, showing the adjustments of the various
angles for the selected vehicle.
Starts the sensor zero and full scale calibration procedure.
Deletes the selected item (Make - Vehicle - Customer - Job) (Make - Vehicle
entered by the user).
Opens the customer record management window.
Prints out the final record of the job done.
Sets chassis clearance data input with unit of measurement in millimetres.
Sets chassis clearance data input with unit of measurement in degrees.
Displays the calibration check window.
Displays the window for input of a new Customer - Vehicle - Make - Operator.
Displays the radio module setup window.
Displays the operator management window.
Displays a window with a list of working windows. Used for skipping between
windows.
Displays the service programme selection window. [Demo – Crooked steering
wheels – Sensor calibration – Sensor test – After-sales service – Job count (if set)
– Radar adjustment (Optional, if enabling has been purchased) – Backup/Restore].
23