Technical Data - SICE A 948 Manual De Instrucciones

"Push Mode ROC"

 simultaneous compensation on the four wheels by pushing the vehicle for a distance
corresponding to a wheel rotation of approximately 90°;
 applicable to 4WD vehicles.
• The adjustment windows, with different layouts of the graphic and numeric parts.
• Help function with animated graphic display of adjustment operations.
• Simplified calculation and adjustment of the toe curve.
• Other programs:
adjustment of the vehicle with wheels raised (jack & hold);

calculation and complete adjustment of the toe curve (optional);

calculation of databank tolerances and storage of latest generation Mercedes camber and

caster values according to the manufacturer's provided procedure (optional);
electronic acquisition of chassis height values, very useful when adjusting French cars

(optional);
calculation and adjustment of the steering rack box height;

calculation and display, in linear units of measurement, of the vehicle track and wheel base;

adjustment of the steering wheel position

measurement and adjustment of heavy vehicles (trucks / trailers / semitrailers) (optional).

measurement and adjustment of AUDI and VW vehicles (AVP Procedure kit) (standard).

• Calibration program.
• Utility and diagnostics programs.
Various types of self-centering clamps are available for the requirements of different wheels.
• Measurement fields (in centesimal degrees):
Toe angle. ..................................................................................................................... ± 48,00°
Camber. ........................................................................................................................ ± 10,00°
Caster ........................................................................................................................... ± 30,00°
King pin ......................................................................................................................... ± 30,00°
Set back ........................................................................................................................ ± 24,00°
Thrust angle .................................................................................................................. ± 24,00°
Steering angle ............................................................................................................... ± 24,00°
Full steering angle (with electronic turntables) ............................................................. ± 60,00°
• Maximum resolution: ........................................................................................ ± 0.01° (0.1 mm)
• Power supply (standard): ............................................................................ 230 Vac. - 50/60 Hz
• Absorbed power: ............................................................................................................. 500 W
• Power supply socket protection (mains fuses): ................................................. 3.15 AT - 250 V
• Radio measuring head batteries: ...... 1.2V, AA, 2000-3000 mA/h NiMH rechargeable batteries
• Radio devices:
- Frequency band ........................................................................................... 2400-2483,5 MHz
- Maximum power .......................................................................................... 10 mW (+ 10dBm)
• Net weight (control unit with 4 sensors):
- Control unit. .................................................................................................................. 125 Kg
- Measuring heads ........................................................................................................... 30 Kg
• Electrical and electronical components weight ................................................................. 20 Kg
• Noise level in work conditions: ................................................................................... < 70 db(A)

TECHNICAL DATA

14
(n. 6 each measuring head)