Operator Record Window; File Data Modification Window; File Data Input Window - SICE A 948 Manual De Instrucciones

- F8 enters a new customer on file
- F10 returns to the job record input window.
Notes
• Press F8 to enter a new customer; the program checks if the customer is stored in the file
when the relevant data are entered. If the data are present, the program signals it and asks if
they have to be displayed. If you answer yes, the window is automatically filled in. If you
answer no, the window appears completely empty.
To access this window, press the F8 key from the job record input window.
It displays the list of operators saved on file.
To select a job, proceed as described in the paragraph "General considerations".
The following keys are active in this window:
- F1 displays the on-line "Help" function
- F2 returns to the previous window
- F3 (or "Enter"): confirms selection of an operator and advances to the window which
displays the operator's data.
- F5 to print the complete list of the operators stored in the file.
- F6 modifies the data of the operator selected from file
- F7 deletes the selected operator from file
- F8 enters a new operator on file
- F10 returns to the job record input window.
Notes
• Press F8 to enter a new vehicle; the program checks if the operator is stored in the file when
the relevant data are entered. If the data are present, the program signals it and asks if they
have to be displayed. If you answer yes, the window is automatically filled in. If you answer no,
the window appears completely empty.
The modification screens refer to:
- Vehicle makes in databank (makes entered by the operator)
- Vehicle models in databank (models entered by the operator)
- Customers on file
- Vehicles on file
- Operators on file
To make a modification, proceed as follows:
- select the field to be modified using the "Tab" or "Shift" + "Tab" keys (if the window contains
more than one field)
- enter a new character/value over the letters or numbers of the selected item
- re-enter the correct value.
To confirm the changes made and exit this window, proceed as follows:
- press the F3 key; you will be prompted to confirm saving of the modified data.
- press F3 to confirm.
If you do not wish to confirm saving, press F2.

OPERATOR RECORD WINDOW

FILE DATA MODIFICATION WINDOW

FILE DATA INPUT WINDOW

29