Job Record Window; Job Record Management Window - SICE A 948 Manual De Instrucciones

The general setup function (F4 from the starting window) has been provided because some
users prefer to change all the available options before starting the measurement procedures.
In all the working windows, press the F4 key to display/set up all the options relating to the
current working window.
If vehicle selection by means of job record has been set in the machine setup as alignment
operating procedure, the job record input window appears automatically.
This window allows input of the vehicle data, the customer and the vehicle make/model
selection following the procedures described in the "General Considerations" section.
The following keys are active in this window:
- F1 displays the on-line "Help" function
- F2 returns to the previous screen
- F3 (or "Enter"): advances to the next window
- F4 sets :
 Units of measurement:
Pressure

• Bar
• Psi.
Mileage/Kilometres on the clock

• Kilometres
• Miles
 Job record
Type

• Minimal
• Complete
- F5 to access job record management
- F6 to access vehicle record management
- F7 to access customer record management
- F8 to access operator record management
- F9 to access the databank and select the vehicle make/model (the databank can also be
accessed by pressing the down arrow on the "Make" line)
- F10 aborts the job in progress and returns to the starting window.
Notes
• By entering the customer and vehicle data, the program checks if the same data are already stored
in the file. If the data are already stored, the page is automatically filled in with the previously stored
data. If all of or some data are not present, they will be stored upon job completion only.
Note: Data storage is performed only if set in the wheel aligner general setup.
To access this window, press the F5 key from the job record input window.
It displays the list of jobs saved on file. To select a job, proceed as described in the paragraph
"General considerations".

JOB RECORD WINDOW

JOB RECORD MANAGEMENT WINDOW

27