Data Bank Abbreviations - SICE A 948 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

• South America
Listing order
• Alphabetical
• By date
Vehicle description
• Commercial
• Manufacturer
- F6
modifies a previously entered make (only for user-entered makes)
- F7
deletes a previously entered make (only for user-entered makes if there are no
associated models)
- F8
enters a new make (see paragraph "Enter/Modify window")
- F10 returns to the starting window.
Notes
• The aligner cannot be operated unless a hardware protection key (SIM) has been inserted.
• The main protection circuit board configured for the basic version is supplied with the
machine.
For the wheel aligner to operate, the main card must always be present and fitted into the
slot inside the unit; in case of malfunction, make sure that the reader is wired correctly
as described in the operator's manual.
• At start up, the program checks for the sim card and operating levels enabled. If the sim card
is not detected, an error message will appear (fig. 44).
• It will only be possible to use the program in demo mode.
• Check that the Hard Lock device is correctly connected to the computer (fig. 11) and/or that
the sim card is present and correctly inserted in the reader.
Notes
- To give an idea of the size of the sim card and thus of the seat provided for it on the circuit
board, fig. 46 shows how this is obtained: press with your thumb on the centre of the card to
release the two connecting tabs and obtain the sim card to be used.
- The sim card must be fitted with the gilded insert (fig. 47) facing upward and the bevelled edge
facing outward, as shown (fig. 47). Push it right into place.
• At start up, as well as checking for the sim card the program also checks the operating levels
enabled on it.
Enabling extra wheel aligner functions
Additional wheel aligner functions are enabled by updating its main protection card.
Upgrading is performed with the "Upgrade SIM CARD" obtained by ordering the relative
accessory kit.
Upgrade cards are marked with specific symbols for identification. More detailed information on
identifying upgrade cards is given in the leaflet accompanying the upgrade card itself.
/
Separates different models
4WD
Four Wheel Drive
4WS
Four Wheel Steering
4x4
Four wheel drive
8565050+
From this chassis number
ATTENTION

Data bank abbreviations

31

Publicidad

Tabla de contenido
loading

Tabla de contenido