If the machine is to be scrapped, remove all electrical, electronic, plastic and metal components
and dispose of them separately, as provided for by local legislation (see fig. 54-54a).
Following disposal procedure shall be exclusively applied to the machines having the crossed-
out bin symbol on their data plate
This product may contain substances that can be hazardous to the environment or to human
health if it is not disposed of properly (see figs. 54-54a).
We therefore provide you with the following information to prevent releases of these substances
and to improve the use of natural resources.
For this purpose the electrical and electronic equipment producers and distributors set up proper
collection and treatment systems for these products.
At the end of life your product contact your distributor to have information on the collection
arrangements.
When buying this new product your distributor will also inform you of the possibility to return free
of charge another end of life equipment as long as it is of equivalent type and has fulfilled the
same functions as the supplied equipment.
A disposal of the product different from what described above will be liable to the penalties
prescribed by the national provisions in the country where the product is disposed of.
We also recommend you to adopt more measures for environment protection: recycling of the
internal and external packaging of the product and disposing properly used batteries (if
contained in the product).
With your help it is possible to reduce the amount of natural resources used to produce
electrical and electronic equipments, to minimize the use of landfills for the disposal of the
products and to improve the quality of life by preventing that potentially hazardous substances
are released in the environment.
RECOMMENDED FIRE-EXTINGUISHING EQUIPMENT
When choosing the most suitable fire extinguisher consult the following table:
Water
Foam
Dry chemical
2
CO
YES* = Use only if more appropriate extinguishers are not on hand and when the fire is small.
ENVIRONMENTAL INFORMATION
Electrical and electronic equipments should never be disposed of in the
usual municipal waste but must be separately collected for their proper
treatment.
The crossed-out bin symbol, placed on the product and in this page, remind
you of the need to dispose of properly the product at the end of its life.
In this way it is possible to prevent that a not specific treatment of the
substances contained in these products, or their improper use, or improper
use of their parts may be hazardous to the environment or to human health.
Furthermore this helps to recover, recycle and reuse many of the materials
used in these products.
Dry combustibles
YES
YES
YES*
YES*
SCRAPPING
Inflammable liquids
NO
YES
YES
YES*
56
Electrical fires
NO
NO
YES
YES*