General Features - SICE A 948 Manual De Instrucciones

• Complete system for measuring the characteristic angles of a vehicle, consisting of four
sensors and one central unit.
• Latest-generation electronics using multiprocessor technology.
• Data communication between the sensors and the central unit:
- by means of radio-frequency devices;
- cable only for emergency conditions.
• Possibility of a cable connection between the central unit and the sensors also for radio-
frequency models.
• Alignment angles measured using CCD goniometers.
• Steering angles up to 24° measured directly by the sensors, without the use of electronic
turntables.
• Central unit equipped with:
- Personal Computer,
- PC keyboard,
- Mouse,
- Ink-jet printer (Optional),
- LCD Monitor (Optional).
• New, simple and intuitive graphic interface for selecting the available functions and displaying
the measurement data.
• Sequence of operations configurable according to the user's needs.
• Program developed on the Windows
• Intelligent unit for simultaneous charging (removable) of the four sensor batteries.
• Sensors powered by incorporated rechargeable Ni-Mh batteries.
• Electronic level on each sensor.
• Direct connection of the electronic turntables to the sensors for full steering measurement.
• Help facility available from any point of the program by pressing the dedicated key.
• Option settings (e.g.: mm / inches, °60,/°100, ...) easily configured within each program
context using menus invoked by pressing a dedicated key.
• Primary vehicle databank containing over 20,000 vehicles with the associated reference data
for the angles.
• Personalized vehicle databank, containing the vehicles and data entered by the user using
the "insert", "modify", "delete" functions.
• Vehicles from the primary and personalized databanks displayed in a single list for easier
consultation.
• Handling of reference data for adjustments based on vehicle chassis height (for vehicles
which support this mode).
• Possibility of saving the job sheets of the operations performed on the vehicles ("Customer
databank").
• Two run-out compensation (ROC) programs:
"3-point ROC":

 Two run-out compensation (ROC) programs;
 possibility of simultaneous execution on several wheels (except for the two wheels on
the same side);
 possibility of fully automatic execution without the need to press any keys.

GENERAL FEATURES

®
platform.
13